-
Details
-
Directions
-
Specifications
MicroCurrent Face-Lift Pen is powered by our advanced MicroCurrent Face-Lift and SmartSonic Pulsation technologies.
This cutting-edge device stimulates over 65 muscles in your face & neck to improve facial contour, toning, and to control the appearance of fine lines. Through a 5-minute daily workout that provides both an Anti-Ageing Massage as well as a MicroCurrent Face-Lift, you are on the fast lane towards tighter & brighter skin.
Our Ultra-Gentle Contouring and Firming Spheres perfectly mimic the way in which your own body triggers the skin healing processes, thus tightening your skin, for a revitalised, healthy-looking face.
Thanks to the Low Voltage Current, using the MicroCurrent Face-Lift Pen is completely safe.
The GESKE Hydrating MicroCurrent Gel is a must for using the MicroCurrent Face-Lift Technology. It perfectly primes your skin for the rejuvenating effects and also moisturises it.
Developed for
- Energising Anti-Ageing Routine
- Attaining a younger & healthy-looking face
- All skin types
Benefits
- Cuts your Anti-Ageing Routine duration & effort to a minimum
- Builds collagen, repairs elastin & tightens your face
- Lifts, firms, and tones the skin
- Increases circulation, eliminates toxins & eases facial tension
- Low voltage current ensures safe usage
- Ensure that the device is dry before turning on the MicroCurrent Face-Lift Technology.
- Always use our specially formulated Hydrating MicroCurrent Gel to enhance the effect of your session.
Full Face & Neck Lift:
- Start with a clean face and apply our specially formulated Hydrating MicroCurrent Gel.
- Turn on the SmartSonic Pulsation and MicroCurrent Face Lift Technology by holding the power button for 2 seconds. Select the desired intensity by using the plus and minus buttons.
- Place the Ultra-Gentle Contouring & Firming Spheres under the eye, next to the nose. Glide the device around your eyes, smile lines, and jawline, repeating each motion several times on both sides of your face.
- Turn the device off by holding the power button for 2 seconds and rinse the device with water to clean it.
Youthful Hands Lift:
- Wash your hands with a mild soap and pat them dry. Apply our Hydrating MicroCurrent Gel to the back of your hands.
- Turn on the SmartSonic Pulsation and MicroCurrent Face Lift Technology by holding the power button for 2 seconds. Select the desired intensity by using the plus and minus buttons.
- Place the Ultra-Gentle Contouring & Firming Spheres below the fingernail on your little finger. Glide the device three times down each finger until you reach your wrist. Next, glide the device in small circles covering all areas of the back of the hand. Repeat these processes on the other hand.
- Turn the device off by holding the power button for 2 seconds and rinse the device with water to clean it.
Your product is a multi-functional MicroCurrent device. It is safe to be used up to 3 times per week but not more than once per day. Please do not use more frequently.
- Materials: ABS, silicone, zinc alloy
- Storage temperature: -5 - +60 C
- Battery: Li-Ion 3.7 V
- Charging Time: approx. 2.5 hours
- Operating Time: Operating time differs depending on activated technologies & intensities.
- Interface: USB
- Programs: Vibration: 3 speed levels, MicroCurrent: 3 intensities
Details
MicroCurrent Face-Lift Pen is powered by our advanced MicroCurrent Face-Lift and SmartSonic Pulsation technologies.
This cutting-edge device stimulates over 65 muscles in your face & neck to improve facial contour, toning, and to control the appearance of fine lines. Through a 5-minute daily workout that provides both an Anti-Ageing Massage as well as a MicroCurrent Face-Lift, you are on the fast lane towards tighter & brighter skin.
Our Ultra-Gentle Contouring and Firming Spheres perfectly mimic the way in which your own body triggers the skin healing processes, thus tightening your skin, for a revitalised, healthy-looking face.
Thanks to the Low Voltage Current, using the MicroCurrent Face-Lift Pen is completely safe.
The GESKE Hydrating MicroCurrent Gel is a must for using the MicroCurrent Face-Lift Technology. It perfectly primes your skin for the rejuvenating effects and also moisturises it.
Developed for
- Energising Anti-Ageing Routine
- Attaining a younger & healthy-looking face
- All skin types
Benefits
- Cuts your Anti-Ageing Routine duration & effort to a minimum
- Builds collagen, repairs elastin & tightens your face
- Lifts, firms, and tones the skin
- Increases circulation, eliminates toxins & eases facial tension
- Low voltage current ensures safe usage
Directions
- Ensure that the device is dry before turning on the MicroCurrent Face-Lift Technology.
- Always use our specially formulated Hydrating MicroCurrent Gel to enhance the effect of your session.
Full Face & Neck Lift:
- Start with a clean face and apply our specially formulated Hydrating MicroCurrent Gel.
- Turn on the SmartSonic Pulsation and MicroCurrent Face Lift Technology by holding the power button for 2 seconds. Select the desired intensity by using the plus and minus buttons.
- Place the Ultra-Gentle Contouring & Firming Spheres under the eye, next to the nose. Glide the device around your eyes, smile lines, and jawline, repeating each motion several times on both sides of your face.
- Turn the device off by holding the power button for 2 seconds and rinse the device with water to clean it.
Youthful Hands Lift:
- Wash your hands with a mild soap and pat them dry. Apply our Hydrating MicroCurrent Gel to the back of your hands.
- Turn on the SmartSonic Pulsation and MicroCurrent Face Lift Technology by holding the power button for 2 seconds. Select the desired intensity by using the plus and minus buttons.
- Place the Ultra-Gentle Contouring & Firming Spheres below the fingernail on your little finger. Glide the device three times down each finger until you reach your wrist. Next, glide the device in small circles covering all areas of the back of the hand. Repeat these processes on the other hand.
- Turn the device off by holding the power button for 2 seconds and rinse the device with water to clean it.
Your product is a multi-functional MicroCurrent device. It is safe to be used up to 3 times per week but not more than once per day. Please do not use more frequently.
Specifications
- Materials: ABS, silicone, zinc alloy
- Storage temperature: -5 - +60 C
- Battery: Li-Ion 3.7 V
- Charging Time: approx. 2.5 hours
- Operating Time: Operating time differs depending on activated technologies & intensities.
- Interface: USB
- Programs: Vibration: 3 speed levels, MicroCurrent: 3 intensities